Table of Contents
Advertisement
Network and Security Manager Installation Guide
Local/Remote Database Backup
NetScreen-Statistical Report Server Interoperability
10
You can also configure the management system to perform an automatic backup of the
GUI Server database to the local server machine and, if necessary, to a remote server
machine.
NOTE: You cannot perform backups to a remote server without also
configuring the management system to perform backups to the local server.
During the installation or upgrade process, the installer script prompts you to specify
whether this server machine requires local database backups. If you choose to do so, the
installer script prompts you to configure the following additional parameters enabling
the management system to perform automatic daily backups of the database:
Hour of Day to store the database backup
Number of database backups to keep
Directory where local database backups are stored
Full path to the rsync command—the management system uses the rsync utility to
perform the database backup
NOTE: The NSM appliances are preconfigured to perform local database
backups. See the NSMXpress and NSM3000 User Guide for details.
If you want to send copies of the file backups to a remote machine, the installer script
prompts you to configure the IP Address of the remote machine
NOTE: If you want the management system to perform remote file backups,
you will need to setup a trust relationship between the management system
server and the remote machine.
If you are installing NetScreen-Statistical Report Server, you must configure it to work
with NSM. During the installation or upgrade process, the installer script prompts you to
configure parameters enabling the management system to communicate with the
Statistical Report Server database and web server. If you choose to do so, the installer
script prompts you to configure the following additional parameters enabling the
management system to work with the NetScreen-Statistical Report Server database:
Database type
Database server IP address
Database port
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1
- Juniper STRM LOG MANAGEMENT 2008.2 - S 6-2008
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 and is the answer not in the manual?