Digi Ix20 Regulatory And Safety Statements; Rf Exposure Statement; Federal Communication (Fcc) Part 15 Class B; Radio Frequency Interference (Rfi) (Fcc15.105) - Digi IX20W-PR User Manual

Digi IX20 regulatory and safety statements

RF exposure statement

In order to comply with RF exposure limits established in the ANSI C95.1 standards, the distance
between the antenna or antennas and the user should not be less than 20 cm.

Federal Communication (FCC) Part 15 Class B

Radio Frequency Interference (RFI) (FCC 15.105)
The Digi IX20 has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to correct the interference by one or more of the following measures:
n Reorient or relocate the receiving antenna.
n Increase the separation between the equipment and the receiver.
n Connect the equipment into an outlet that is on a circuit different from the receiver.
n Consult the dealer or an experienced radio/TVtechnician for help.
Labeling Requirements (FCC 15.19)
IX20 complies with Part 15 of FCCrules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
If the FCCID is not visible when installed inside another device, then the outside of the device into
which the module is installed must also display a label referring to the enclosed module FCCID.
Modifications (FCC 15.21)
Changes or modifications to this equipment not expressly approved by Digi may void the user's
authority to operate this equipment.
FCC ID
Digi IX20 with CMG4 CORE module utilizes a cellular modem by Quectel, model EG25-Gwith FCCID:
XMR201903EG25Gand Type Allocation Code (TAC): 86769804, assigned by the GSMA.
IX20 User Guide 1116