Adjusting Cab Display Contrast - MacDon M155 Unloading And Assembly Instructions

5. Press SELECT (D) until BACKLIGHTING appears on the
upper line.
• The current setting will appear on the lower line.
6. Press left arrow (B) or right arrow (C) to adjust the degree
of backlighting.
7. Press PROGRAM (A) to exit programming mode or press
SELECT (D) to proceed to the next CAB DISPLAY SETUP?
option.

7.2.5 Adjusting Cab Display Contrast

Contrast is the degree of difference between the lightest and darkest colours a display can produce. The contrast of the cab
display module's (CDM) display screen can be adjusted by accessing the DISPLAY CONTRAST sub-menu in the CAB DISPLAY
SETUP menu.
1. Turn the ignition key to the RUN position, or start the
engine.
2. Press PROGRAM (A) and SELECT (B) on the cab display
module (CDM) to enter programming mode.
• WINDROWER SETUP? will appear on the upper line.
• NO/YES will appear on the lower line.
3. Press SELECT (B) until CAB DISPLAY SETUP? appears on the
upper line.
• NO/YES will appear on the lower line.
4. Press right arrow (A) to select YES. Press SELECT (B).
• DISPLAY LANGUAGE? will appear on the upper line.
262320
CAB DISPLAY MODULE
A
Figure 7.13: Backlighting
A
Figure 7.14: CDM Programming Buttons
Figure 7.15: Cab Display Setup
209
BACKLIGHTING
CXXX
MXXX
B
WINDROWER SETUP?
CXXX
MXXX
NO/YES
CAB DISPLAY SETUP?
CXXX
MXXX
NO/YES
D
C
B
B
A
Revision A