MacDon M155 Unloading And Assembly Instructions page 281

3. Press SELECT (B) until DIAGNOSTIC MODE? appears on the
upper line.
• NO/YES will appear on the lower line.
4. Press right arrow (A) to select YES. Press SELECT (B).
5. Press SELECT (B) until ACTIVATE FUNCTIONS? appears on
the upper line.
• NO/YES will appear on the lower line.
6. Press right arrow (A) to select YES. Press SELECT (B).
• ACTIVATE HEADER HT will appear on the upper line.
7. Press SELECT (E) until REEL DRV SPD XXXX appears on the
upper line.
8. Press and hold HAZARD (C) button.
• Press left arrow (B) to decrease the reel speed.
• Press right arrow (D) to increase the reel speed.
IMPORTANT:
Do NOT overspeed the reel.
NOTE:
Ensure that the reel drive is working properly.
9. Release HAZARD (C) button. The reel will stop.
10. Press PROGRAM (A) to exit programming mode or press
SELECT (E) to proceed to the next header function option.
262320
CAB DISPLAY MODULE
Figure 7.136: Diagnostic Functions
Figure 7.137: Functions
A
B
Figure 7.138: Reel Drive
265
DIAGNOSTIC MODE?
CXXX
MXXX
NO/YES
ACTIVATE FUNCTIONS?
CXXX
MXXX
NO/YES
CXXX REEL DRV SPD XXXX
MXXX D 0 P 0
C
B
A
B
A
- +
D E
D
Revision A