23. Connect header drive hoses (A) and electrical harness (B) to
the header. For instructions, refer to the header operator's
manual.
24. Connect reel hydraulics (A) to the corresponding
connections at the right cab-forward side of the windrower.
For instructions, refer to the header operator's manual.
25. Start the engine. Raise and lower the header and the reel a
few times to remove any trapped air from the hydraulic
system.
262320
ATTACHING HEADERS
Figure 6.146: Header Drive Hoses and Harness
Figure 6.147: Reel Hydraulics
184
B
A
A
Revision A