MacDon M155 Unloading And Assembly Instructions page 71

32. Remove any straps that secure electrical harness (D) to
hydraulic hose bundle (A).
33. Route hose bundle (A) and hose (B) through hose
support (C) and lay the hoses on the tire.
34. Route electrical harness (D) along the right side of hose
support (C) as shown.
35. Secure electrical harness (D) to hose support (C) using
tie (E).
36. Secure electrical harness (D) and hose (B) using ties (F).
37. Attach harness (A) to the hose support with hose clip (B).
262320
ASSEMBLING WINDROWER
C
Figure 3.34: Hose Routing
Figure 3.35: Harness Routing — Right Side of Hose
Support
55
D
E
D F
A B
A
B
Revision A