MacDon M155 Unloading And Assembly Instructions page 9

Section
6.3 Attaching D2 SP Series Draper Header,
page 161
6.3.1 Attaching Draper Header Supports,
page 161
6.3.2 Attaching D2 SP Series Draper Header –
Hydraulic Center-Link with Self-Alignment,
page 162
6.3.3 Attaching D2 SP Series Draper Header –
Hydraulic Center-Link without Self-Alignment,
page 169
6.3.4 Attaching D2 SP Series Draper Header –
Mechanical Center-Link, page 177
6.4.1 Attaching R or R1 Series Rotary Disc
Header – Hydraulic Center-Link with
Self-Alignment, page 185
6.4.2 Attaching R or R1 Series Rotary Disc
Header – Hydraulic Center-Link without Self-
Alignment, page 191
6.4.3 Attaching R or R1 Series Rotary Disc
Header – Mechanical Center-Link, page 198
7 Cab Display Module, page 203
8.1.6 O-Ring Boss Hydraulic Fittings – Non-
Adjustable, page 280
8.1.5 O-Ring Boss Hydraulic Fittings –
Adjustable, page 278
8.1.7 O-Ring Face Seal Hydraulic Fittings,
page 280
8.4 Lubricants, Fluids, and System Capacities,
page 286
262320
Summary of Change
Added topic.
Added topic.
Added topic.
Added topic.
Added topic.
Revised DANGER to mention safety props.
Revised DANGER to mention safety props.
Revised DANGER to mention safety props.
Moved this chapter.
Updated torque values in the table.
Updated torque values in the table.
Minor corrections in the table of torque values:
• Size -6: rounded lbf-ft from 29 up to 30.
• Size -24: corrected "Thread Size" from 1-2 to 2
Corrected the metric fuel tank capacity to 367 L
(was 378 L).
vii
Internal Use Only
Technical
Publications
Technical
Publications
Technical
Publications
Technical
Publications
Technical
Publications
Technical
Publications
Technical
Publications
Technical
Publications
ECN 64539
ECN 64539
Technical
Publications
Technical
Publications
Revision A