MacDon M155 Unloading And Assembly Instructions page 78

5. Attach the main beam of the platform to the side frame
using three 1/2 x 1 1/4 in. long carriage bolts (A). Ensure
the bolt heads face inboard, and tighten them just enough
to allow you to reposition the platform while installing it.
6. Attach the steering arm to the frame with two
3/8 x 3/4 in. long carriage bolts and nuts (A). Ensure the
bolt heads face inboard, and tighten the bolts.
7. Remove the sling.
8. Attach the railings to the platform with 1/2 x 3/4 in. locking
bolts (A). Torque the bolts to 102 Nm (75 lbf·ft).
262320
ASSEMBLING WINDROWER
Figure 3.49: Left Platform – Main Beam
Figure 3.50: Left Platform – Steering Arm
Figure 3.51: Left Platform – Railings
62
A
A
A
A
Revision A