Activating Reel Fore-Aft Control Lockout - MacDon M155 Unloading And Assembly Instructions

4. Press SELECT (B) until SET CONTROL LOCKS? appears on the
upper line.
• NO/YES will appear on the lower line.
5. Press right arrow (A) to select YES. Press SELECT (B).
6. Press SELECT (D) until HEADER FLOAT appears on the
upper line.
• ENABLED/LOCKED will appear on the lower line.
7. Press left arrow (B) to enable the HEADER FLOAT control
switch, or press right arrow (C) to lock the HEADER FLOAT
control switch.
8. Press PROGRAM (A) to exit programming mode or press
SELECT (D) to proceed to the next WINDROWER SETUP
option.

7.4.3 Activating Reel Fore-Aft Control Lockout

Activating the header reel fore-aft control lockout in the windrower's cab display module (CDM) prevents unauthorized
Operators from changing the reel fore-aft setting of the attached header.
NOTE:
• This procedure applies to windrowers with attached draper headers only.
• The header MUST be attached to the windrower to perform this procedure. The CDM automatically selects the header
profile based on the type of attached header.
262320
CAB DISPLAY MODULE
Figure 7.59: Control Locks
A
B
Figure 7.60: Header Float Control Lock
231
CXXX SET CONTROL LOCKS?
MXXX
NO/YES
CXXX HEADER FLOAT
MXXX
ENABLED/LOCKED
B
A
D
C
Revision A