MacDon M155 Unloading And Assembly Instructions page 114

13. Open the maintenance platform on the right (cab-
forward) side.
14. Open fuse cover (A).
15. Remove ignition power fuse (15A) (A).
DANGER
Ensure that all bystanders have cleared the area.
16. Prime the system by cranking the engine with the ignition
key for 15 seconds.
17. Reconnect the electrical connection at the fuel pump and at
the brake engage solenoid.
18. Reinstall ignition power fuse (15A) (A) and the fuse cover.
19. Close the engine compartment hood.
262320
PREDELIVERY CHECKS
Figure 4.25: Fuse Cover
A
F1 - 40A
F2 - 30A
F19 - 30A
F20 - 30A
K1
A/C
BLOWER
Figure 4.26: Fuse Panel
98
F3 - 30A
F4 - 25A
K2 K5 K5 K8 K11
BRAKE SW ACC / AUX LH TURN
NEUTRAL NEUTRAL
RELAY LOGIC LOGIC REAR PWR SIGNAL
K3
K6 K6 K9 K12
LIGHTING
SEAT SEAT A/C RH TURN
DIRECTION
POWER POWER CONTROL SIGNAL
RELAY
K4 K10 K13
K7 K7 K7 K7
GPS SW ECM UPPER EF
WIPERS WIPERS WIPERS WIPERS
PWR IGNITION LIGHTS
A
K14
CF - WORK
LIGHTS
K15
HI / LOW
BEAM - CF
K16
HI / LO
BEAM - EF
Revision A