MacDon M155 Unloading And Assembly Instructions page 220

Menu item scroll forward: Displays the value of the currently selected menu item.
• Push the MENU ITEM SCROLL FORWARD button to scroll forward
• Hold the MENU ITEM SCROLL FORWARD button down to scroll rapidly
NOTE:
Fast scroll is available only when the Operator is changing the KNIFE SPEED, OVERLOAD PRESSURE, or TIRE SIZE settings.
Menu item scroll backward: Displays the value of the currently selected menu item.
• Push the MENU ITEM SCROLL BACKWARD button to scroll backward
• Hold down the MENU ITEM SCROLL BACKWARD button to scroll rapidly
NOTE:
Fast scroll is available only when the Operator is changing the KNIFE SPEED, OVERLOAD PRESSURE, or TIRE SIZE settings.
Program Switch: Pressing this switch along with the SELECT switch puts the CDM into programming mode.
NOTE:
The following menus are available when the ignition key is in the RUN position:
• WINDROWER SETUP
• CAB DISPLAY SETUP
• DIAGNOSTIC MODE
The CALIBRATE SENSORS menu is available only when the engine is running.
262320
CAB DISPLAY MODULE
204
Revision A