MacDon M155 Unloading And Assembly Instructions page 8

Section
6 Attaching Headers, page 123
6.1.1 Attaching A Series Auger Header –
Hydraulic Center-Link with Self-Alignment,
page 123
6.1.2 Attaching A Series Auger Header –
Hydraulic Center-Link without Self-Alignment,
page 129
6.1.3 Attaching A Series Auger Header –
Mechanical Center-Link, page 135
6.2.1 Attaching Draper Header Supports,
page 141
6.2.2 Attaching D or D1 SP Series Draper
Header – Hydraulic Center-Link with Self-
Alignment, page 142
6.2.3 Attaching D or D1 SP Series Draper
Header – Hydraulic Center-Link without Self-
Alignment, page 149
6.2.4 Attaching D or D1 SP Series Draper
Header – Mechanical Center-Link, page 155
262320
Summary of Change
Reordered attaching topics alphabetically.
Revised DANGER to mention safety props.
Revised DANGER to mention safety props.
• Revised DANGER to mention safety props.
• Added two steps (lower the header, and shut
the engine off) near the end of the procedure.
• Added DANGER.
• Added "Shut engine off..." step.
• Added illustration 1042433 and associated
IMPORTANT.
• Moved the step (removing float) associated
with illustration 1029714 to the attaching
header procedures.
• Revised DANGER to mention safety props.
• Replaced the NOTE (concerning header
supports) with illustration 1042469 and the
associated step.
• Added illustration 1036885 and associated
step (removing forming shield bracket).
• Added illustration 1029714 and
associated step.
• Revised DANGER to mention safety props.
• Replaced the NOTE (concerning header
supports) with illustration 1042469 and the
associated step.
• Added illustration 1036885 and associated
step (removing forming shield bracket).
• Added illustration 1029714 and
associated step.
• Revised DANGER to mention safety props.
• Replaced the NOTE (concerning header
supports) with illustration 1042469 and the
associated step.
• Added illustration 1036885 and associated
step (removing forming shield bracket).
• Added illustration 1029714 and
associated step.
vi
Internal Use Only
Technical
Publications
Technical
Publications
Technical
Publications
Technical
Publications
Product Support
Technical
Publications
Technical
Publications
Technical
Publications
Technical
Publications
Revision A