Table of Contents
Advertisement
5.17 CAB DISPLAY MODULE (CDM)
5.17.1
Engine and Windrower Tractor
Functions
GROUND SPEED
mph or kph
ENGINE RPM
ENGINE WARNING LIGHTS
Engine Pre-Heat/Water In
Fuel/Do not Operate/Stop Engine
IGNITION SWITCH POSITIONS
Accessory/Stop/Run/Start
5.17.2
Header Functions
RETURN TO CUT HEIGHT SWITCH
Allows Cutting Height Pre-Set
Push-On/Push-Off
Illuminates In On Position
NOTE
HEADER MUST BE ENGAGED.
HEADER INDEX SWITCH
Links Reel and Conveyor Speed to Ground Speed
Push-On/Push-Off
Illuminates In On Position
Form # 169017
OPERATOR'S STATION
DISPLAY
Engine/Windrower Tractor Functions
DISPLAY
Header Functions
HAZARD WARNING LIGHTS SWITCH
Activates Hazard Warning Lights
Cancels Turn Signal
Activates Turn Signals On Windrower Tractor
and Header
Engine Forward Mode Only
Push-On/Push-Off
AUGER/DRAPER SPEED ADJUST
Changes Auger/Draper Speed INDEX with INDEX SWITCH on.
Changes Auger/Draper SPEED with INDEX SWITCH off.
Push Upper Switch to Increase
Push Lower Switch to Decrease
30
SELECT SWITCH
Allows Operator To Select Display Item
On Lower Line.
See Table
Push To Select
TURN SIGNAL SWITCHES
SELECT SWITCH
Allows Operator To Select Display Item.
Bottom Line - See Table
Push To Select
FLOAT SWITCH – HEADER RIGHT SIDE
Changes Header Float
Push + to Increase/Push – to Decrease
Remembers Setting With Deck Shift Option If
Activated With Float Setting Switch
FLOAT SWITCH – HEADER LEFT SIDE
Same As Above
Issue – June 2008
Advertisement
Table of Contents
