Adjusting The Cab Display Contrast - MacDon M Series Unloading And Assembly Instructions

Self-propelled windrower

Hide thumbs Also See for M Series:

Table of Contents

4.2.5 Adjusting the Cab Display Contrast

1. Turn ignition key to RUN, or start the engine.

2. Press PROGRAM (A) and SELECT (C) on cab display

module (CDM) to enter Programming Mode.

• WINDROWER SETUP? is displayed on the

• NO/YES is displayed on the lower line.

CAB DISPLAY MODULE (CDM)

Figure 4.39: M105 CDM Programming Buttons

Figure 4.40: M155 CDM Programming Buttons

Figure 4.41: M205 CDM Programming Buttons