7. Attach a chain to the right caster and support the caster
with a lifting device that has a minimum lifting capacity of
2268 kg (5000 lb.). Make sure both bearing lock collars (A)
are locked before lifting the caster.
8. Remove and retain the remaining parts from the
shipping frame:
• Two 3/4 x 2 3/4 in. bolts (A)
• Three 3/4 x 2 1/4 in. bolts (D)
• Five washers (B)
• Right anti-shimmy bracket (C) (when removing the right
caster)
NOTE:
When removing the left caster from the shipping frame,
remove and retain the same quantity of hardware, and
retain left anti-shimmy bracket (E).
Retain the hardware for the installation of the walking
beam starting in Step
262320
ASSEMBLING WINDROWER
11, page
47.
A
Figure 3.16: Lifting Device on Caster
Figure 3.17: Shipping Frame on Caster
45
A B
C
A
B
D
C
A
E
B B
Revision A
D B
C
B
D