MacDon M155 Unloading And Assembly Instructions page 56

6. Insert the leg into the frame and line up the holes in the
frame and the leg at the first position (widest tread with
one exposed hole [A]).
7. Insert pins (B) and secure the with the following hardware
(retained from Step 1, page
• Washers (C)
• 3/4 x 16 1/2 in. long bolts (D)
• Nuts (E)
8. Torque nuts (E) to 142 Nm (105 lbf·ft).
9. Repeat Step 1, page 38
opposite leg.
10. Use the lifting device to slightly lift the header lift arms, and
remove lifting bars (A) from the legs.
11. Relocate spring locking pins (B) to the front of the lift arms.
262320
ASSEMBLING WINDROWER
38):
to Step 8, page 40 for the
F F E
E C
Figure 3.7: Leg Position on Frame
A
Figure 3.8: Header Lift
40
D B
C C
B D
A
B
Revision A