14. Insert two left traction drive hoses (A) into the hose block
as shown. Case drain hose (B) is preinstalled in the block.
15. Insert two right traction drive hoses (C) into the hose block
as shown.
16. Reinstall clamp (A).
17. Remove four caps (A) from traction drive pump (B).
262320
ASSEMBLING WINDROWER
Figure 3.26: Hose Block – View Looking Forward
Figure 3.27: Hose Routing
Figure 3.28: Traction Drive Pump — Bottom Left Side
52
A
C
B
A
B
A
Revision A