MacDon M155 Unloading And Assembly Instructions page 63

Figure 3.19: Walking Beam Installation
11. Install four 3/4 x 2 1/4 in. bolts (A) and washers into the walking beam.
12. Connect anti-shimmy dampener (E) to anti-shimmy bracket (B) using the bolt and nut (D) what was shipped attached
to the dampener. Do NOT tighten the nut yet.
13. Install anti-shimmy bracket (B) onto the walking beam using two 3/4 x 2 3/4 in. bolts (A).
NOTE:
Anti-shimmy bracket (B) is for the right caster. Anti-shimmy bracket (F) is for the left caster.
262320
ASSEMBLING WINDROWER
F
C A
47
B
C C
D
B A
E
Revision A