MacDon M155 Unloading And Assembly Instructions page 255

4. Press SELECT (B) until SET CONTROL LOCKS? appears on the
upper line.
• NO/YES will appear on the lower line.
5. Press right arrow (A) to select YES. Press SELECT (B).
6. Press SELECT (D) until REEL SPEED appears on the
upper line.
• ENABLED/LOCKED will appear on the lower line.
7. Press left arrow (B) to enable the REEL SPEED control
switch.
Press right arrow (C) to lock the REEL SPEED control switch.
8. Press PROGRAM (A) to exit programming mode, or press
SELECT (D) to proceed to the next WINDROWER SETUP
option.
262320
CAB DISPLAY MODULE
Figure 7.77: Control Locks
A
B
Figure 7.78: Reel Speed Control Lock
239
CXXX SET CONTROL LOCKS?
MXXX
NO/YES
CXXX REEL SPEED
MXXX
ENABLED/LOCKED
B
A
D
C
Revision A