MacDon M155 Unloading And Assembly Instructions page 72

38. Disengage and rotate hook (A) to the fully up position.
39. Position hose bundle (B) over the hose support and under
the hook.
40. Route electrical harness (A) along the topside of hose
bundle (B) as shown to prevent chafing of the electrical
wires when the windrower is operating with a header.
41. Secure electrical harness (A) to hose bundle (B) using
strap (C).
262320
ASSEMBLING WINDROWER
Figure 3.36: Hook Positioning
Figure 3.37: Harness Routing — Front Side of Hose
Support
56
A
B
C
B
A
Revision A