5. Remove two bolts and nuts (A) securing hand rail (B) to the
shipping frame, and remove the hand rail. Retain the two
bolts but discard the nuts.
6. Repeat Step
5, page 28
opposite side.
7. Set the following hand rail parts aside for later installation:
• Left hand rail (A)
• Right hand rail (B)
• Four 1/2 x 3/4 in. bolts (C)
262320
UNLOADING WINDROWER
for the hand rail on the
B
Figure 2.29: Hand Rails and Exhaust Stack Shipping
Position
C C
Figure 2.30: Hand Rails and Bolts Retained from
Shipping
28
A
A
B
Revision A