Cab Display Module (Cdm); Engine And Windrower Functions; Header Functions - MacDon M205 2010 Operator's Manual

Self-propelled windrower
Table of Contents

Advertisement

5.18 CAB DISPLAY MODULE (CDM)

5.18.1 ENGINE AND WINDROWER
FUNCTIONS
GROUND SPEED
mph or kph
ENGINE RPM
ENGINE WARNING LIGHTS
Engine Pre-Heat/Water inside
Fuel/Do not Operate/Stop Engine
IGNITION SWITCH POSITIONS
Accessory/Stop/Run/Start

5.18.2 HEADER FUNCTIONS

Header Functions
RETURN TO CUT HEIGHT
SWITCH
Allows Cutting Height Pre-Set
Push-On/Push-Off
NOTE
HEADER MUST BE ENGAGED.
HEADER INDEX SWITCH
Links Reel and Conveyor Speed to Ground Speed
Push-On/Push-Off
Illuminates In On Position
Form 169469/169470/169471
OPERATOR'S STATION
DISPLAY
Engine/Windrower Functions
DISPLAY
HAZARD WARNING LIGHTS SWITCH
Activates Hazard Warning Lights
Cancels Turn Signal
Activates Turn Signals on Windrower and Header
Push-On/Push-Off
FLOAT SWITCH – HEADER RIGHT SIDE
Changes Header Float
Push + to Increase/Push – to Decrease
Remembers Setting with Deck Shift Option If
Activated With Float Setting Switch
Same As Above
AUGER/DRAPER SPEED ADJUST
Changes Auger/Draper Speed INDEX with INDEX SWITCH on.
Changes Auger/Draper SPEED with INDEX SWITCH off.
Push Upper Switch to Increase
Push Lower Switch to Decrease
35
SELECT SWITCH
Allows Operator To Select Display Item
On Lower Line.
See Pages 36-41
Push to Select
TURN SIGNAL SWITCHES
SELECT SWITCH
Allows Operator To Select Display
Item.
Bottom Line - See Pages 36-41
FLOAT SWITCH – HEADER LEFT SIDE
Revision C

Advertisement

Table of Contents
loading

This manual is also suitable for:

M205

Table of Contents