MacDon M155 Unloading And Assembly Instructions page 43

2. Remove the shipping wire and foam from exhaust stack (A).
3. Remove nuts (B) from clamp (C), and remove exhaust
stack (A) and the clamp from the shipping frame.
4. Reinstall nuts (B) onto clamp (C) and set exhaust stack (A)
aside for later installation.
262320
UNLOADING WINDROWER
Figure 2.27: Hand Rails and Exhaust Stack Shipping
Position
Figure 2.28: Exhaust Stack, Clamp, and Nuts Retained
from Shipping
27
B
C A
C
A B
A
C
Revision A