MacDon M155 Unloading And Assembly Instructions page 80

12. Ensure the front of the platform is contacting guide (A).
13. Adjust the platform horizontally with 1/2 x 2 1/4 in. bolt (A)
as needed.
14. If major adjustment is required, relocate steering arm (A)
into either of the other holes on bracket (B).
15. Tighten the three main beam attachment bolts to 108 Nm
(80 lbf·ft).
16. Repeat this procedure to install the right side platform.
262320
ASSEMBLING WINDROWER
Figure 3.55: Left Platform – Guide
Figure 3.56: Left Platform – Main Beam
Figure 3.57: Left Platform – Steering Arm
64
A
A
A
B
Revision A