MacDon M155 Unloading And Assembly Instructions page 168

15. Engage the safety props on both lift cylinders:
a. Shut down the engine, and remove the key from the
ignition.
b. Pull lever (A) and rotate it towards the header to
release and lower safety prop (B) onto the lift cylinder.
c. Repeat the previous steps for the opposite lift cylinder.
16. Remove the clevis pin from storage position (B) in the
linkage and insert it into hole (A) to engage the float
springs. Secure it with the hairpin. Repeat this step on the
opposite float linkage.
262320
ATTACHING HEADERS
Figure 6.75: Safety Prop
Figure 6.76: Header Float Linkage
152
A
B
A
B
Revision A