MacDon M155 Unloading And Assembly Instructions page 286

3. Press SELECT (B) until DIAGNOSTIC MODE? appears on the
upper line.
• NO/YES will appear on the lower line.
4. Press right arrow (A) to select YES. Press SELECT (B).
5. Press SELECT (B) until ACTIVATE FUNCTIONS? appears on
the upper line.
• NO/YES will appear on the lower line.
6. Press right arrow (A) to select YES. Press SELECT (B).
7. Press SELECT (D) until ACTIVATE REEL F/A appears on the
upper line.
• FORE/AFT will appear on the lower line.
8. Ensure that the reel fore-aft function is working properly.
a. Press and hold left arrow (B) to move the reel forward.
Press and hold right arrow (C) to move the reel
aftward.
b. Press PROGRAM (A) to exit programming mode or
press SELECT (D) to proceed to the next header
function option.
262320
CAB DISPLAY MODULE
MXXX
Figure 7.148: Diagnostic Functions
MXXX
Figure 7.149: Functions
MXXX
A
B
Figure 7.150: Reel Fore-Aft
270
DIAGNOSTIC MODE?
CXXX
NO/YES
ACTIVATE FUNCTIONS?
CXXX
NO/YES
ACTIVATE REEL F/A
CXXX
FORE/AFT
B
A
B
A
D
C
Revision A