Lubricants, Fluids, And System Capacities - MacDon M155 Unloading And Assembly Instructions

8.4 Lubricants, Fluids, and System Capacities

Refer to the table below for information on the appropriate lubricants and fluids for the windrower, and for the capacity of
each system. Follow the procedures for filling each system provided in this manual.
WARNING
To avoid injury or death, do NOT allow ANY machine fluids to enter the body.
Table 8.17 Windrower System Capacities
Lubricant/Fluid
As required unless
Grease
otherwise specified
Diesel fuel
Hydraulic oil Hydraulic reservoir
Gear lubricant
Gear lubricant
Coolant
Engine oil
Air conditioning
18
refrigerant
Air conditioning
refrigerant oil 19 system total capacity
14. Optional when operating temperature is below 0°C (32°F).
15. SAE 75W-140 may be substituted for SAE 80W-140 if necessary.
16. SAE 85W-140 API Service Class GL-5. Extreme Pressure Gear Lubricant is used before initial change.
17. Equal parts with high quality, soft, deionized or distilled water as recommended by Supplier.
18. For prior models that have not upgraded to 2.27 kg (5 lb.) of refrigerant order Kit MD #183180, which includes decal
to advise of systems 2.27 kg (5 lb.) charge requirement, refer to Service Bulletin 1254.
19. New compressor (MD #183515) comes filled. If installing on 2014 and prior models, refer to Service Bulletin 1254.
262320
Location
SAE multi-purpose high temperature
extreme pressure (EP2) performance with
1% maximum molybdenum disulphide
Diesel Grade No. 2, or Diesel Grade No. 1
and 2 mix
Fuel tank
SAE 15W-40 compliant with SAE specs for
SAE 80W-140
synthetic gear lubricant (SAE J2360
Gearbox
SAE 75W-90, API service class GL-5 fully
synthetic gear lubricant (SAE J2360
Wheel drive 16
ASTM D-6210 and CES-14603, Peak Final
Engine cooling
Charge Global
system
OAT; refer to
SAE 15W-40 compliant with SAE specs for
Engine oil pan
Air conditioning
system
Air conditioning
REFERENCE
Description
(NLGI Grade 2); lithium base
14
; refer to 8.5 Fuel Specifications,
page 288 for more information
API class SJ and CH-4 engine oil.
15 , API service class GL-5 fully
preferred)
preferred)
™
®
, Fleetguard ES Compleat
notes following this table
API class SJ and CH-4 engine oil
R134A
PAG SP-15
286
Capacity
—
367 L
(97 U.S. gal)
65 L
(17.2 U.S. gal)
2.1 L
(2.2 U.S. qt.)
1.4 L
(1.5 U.S. qt.)
24 L
™
(6.3 U.S. gal) 17
11 L
(11.6 U.S. qt.)
2.27 kg (5 lb.)
240 cc (8.1 fl. oz.)
Revision A