MacDon M155 Unloading And Assembly Instructions page 6

Introduction
This instruction manual describes the unloading, setup, and predelivery requirements for the MacDon M155 Self-Propelled
Windrowers shipped in containers.
Carefully read all the material provided before attempting to unload, assemble, or use the machine.
Retain this instruction for future reference.
Conventions
The following conventions are used in this document:
• The windrower is Dual Direction
• Right and left designations are determined by the operator's position facing the direction of travel. This manual uses
the terms right cab-forward, left cab-forward, right engine-forward, and left engine-forward when referencing specific
locations on the machine.
• Unless otherwise noted, use the standard torque values provided in Chapter
document.
NOTE:
Keep your MacDon publications up-to-date. The most current version can be downloaded from our Dealer-only site
(https://portal.macdon.com) (login required).
This instruction is available in English and Russian and can be downloaded from our Dealer-only site.
If the shipment is damaged or is missing parts, contact the following according to your region:
• Australia:
service@macdon.com.au
• Brazil:
garantia-brasil@macdon.com
• Europe (except Russia):
• Russia:
shortageanddamage@macdon.com
262320
® and can be driven in cab-forward or engine-forward mode.
MarketingEurope@macdon.com
8.1 Torque Specifications, page 273
iv
of this
Revision A