Predelivery Checklist - MacDon M155 Unloading And Assembly Instructions

Predelivery Checklist

Perform these checks and adjustments prior to delivery to your Customer. Complete this checklist and provide it to the
Dealer or the Operator.
CAUTION
Carefully follow the instructions given. Be alert for safety related messages that bring your attention to hazards and
unsafe practices.
Windrower Serial Number:
Table .19 Self-Propelled Windrower Predelivery Checklist – Container Shipments
ü ü Item
Check for shipping damage or missing parts. Be sure all
shipping dunnage is removed.
Check for loose hardware. Tighten to required torque.
Check tire air pressures and adjust as required.
Check final drive hub lubricant level.
Check engine coolant level and strength at reserve tank.
Check air cleaner and clamps.
Check hydraulic oil level and check for leaks along lines.
Check fuel separator for water and foreign material. Drain
and clean as necessary. Add fuel.
Check engine oil level.
Check gearbox lubricant level.
Check tension of air conditioning compressor belt.
Check that machine is completely lubricated.
Check neutral interlock system.
Start engine and run to operating temperature.
Check CDM for operation.
Check Operator's Presence System.
Check alternator charge rate on CDM.
Check fuel gauge / indicator for operation.
Check that air conditioning is functioning properly.
Check that heater is functioning properly.
Check instrument console gauge lights.
Check maximum (no load) engine speed at CDM.
Check that exterior lights are functioning properly.
Check that interior lights are functioning properly.
262320
Engine Serial Number:
Reference
8 Reference, page 273
4.2.1 Checking Tire Pressure, page 83
4.12 Checking and Adding Wheel Drive Lubricant,
page 100
4.8 Checking Engine Coolant, page 90
4.3 Checking Engine Air Intake, page 85
4.4 Checking Hydraulic Oil Level, page 86
4.5 Checking Fuel Separator, page 87
4.6 Checking Engine Oil Level, page 88
4.7 Checking Gearbox Lubricant Level, page 89
4.9 Checking Air Conditioning Compressor Belt, page
91
3.15 Lubrication, page 73
5.1 Checking Safety System, page 103
5.3 Checking Windrower Startup, page 107
5.5 Checking Gauges and Cab Display Module
Display, page 109
5.7 Checking Operator Presence System, page 111
5.6 Checking Electrical System, page 110
5.5 Checking Gauges and Cab Display Module
Display, page 109
5.11 Checking Air Conditioning and Heater, page
119
5.11 Checking Air Conditioning and Heater, page
119
5.5 Checking Gauges and Cab Display Module
Display, page 109
5.4 Checking Engine Speed, page 108
5.8 Checking Exterior Lights, page 113
5.10 Checking Interior Lights, page 118
289
—
Revision A