MacDon M155 Unloading And Assembly Instructions page 41

5. Remove two 5/8 x 5 in. bolts (B) from the top of the vertical
supports, and remove two 5/8 x 1 1/4 in. bolts (A) attaching
the angle braces to the platforms.
6. Carefully lift the platform assembly off the frame.
7. Back away from the windrower. Set the platform assembly
on level ground that is covered with cardboard.
8. Unhook one sling and chain.
9. Lift one end of the platform assembly so it can be inverted
and laid down with the base on the floor.
10. Unhook the remaining sling.
262320
UNLOADING WINDROWER
Figure 2.23: Platforms on Hood
Figure 2.24: Platforms
Figure 2.25: Platforms
25
A
B
Revision A