Chapter 2: Unloading Windrower; Unloading Container - MacDon M155 Unloading And Assembly Instructions

Chapter 2: Unloading Windrower

Unload all windrower parts before beginning assembly. Follow these procedures in the order in which they are presented.

2.1 Unloading Container

Unload the windrower properly to avoid damaging the windrower.
DANGER
Do NOT allow bystanders in the unloading area.
1. Move the trailer into position and block the trailer wheels.
2. Lower the trailer storage stands.
3. Unlock and open the container doors and remove all the
blocking.
4. Check the container floor for nails or other obstructions
and remove them if necessary.
5. Position the platform or the ramp at the container opening.
6. Attach the chain/pull strap to the slots in support
channels (A).
7. Pull the windrower slowly from the container onto the
platform.
262320
Figure 2.1: Windrower Shipping Assembly
13
A
Revision A