Coin Return Bracket Upgrade - Nortel Millennium M1000 Manual

rprbk203 Page 51 Tuesday, February 16, 1999 9:12 AM

Coin return bracket upgrade

Figure 6-41: Identifying the coin return bracket
Face
Coin return
bracket
This procedure describes installing a coin return bracket
for Millennium Multi-pay terminals.
This bracket provides a vandalism/fraud-deterrent solu-
tion.
Refer to Figure 6-41 to see how the bracket fits over the
coin return assembly.
Coin
return
bracket
Bracket
straddles
projection
on coin
return
Coin
return
(external
view)
The following procedure describes in detail how to install
the coin return assembly bracket.
1. This procedure assumes you have followed the direc-
tions in Preparing the terminal for maintenance on
page 2-3.
Note: It is not necessary to upload CDRs or discon-
nect the power to do this procedure but it is recom-
mended that you do so.
DO CONNECT your ESD wrist strap to an ESD con-
nection point inside the terminal.
Millennium Multi-pay-based terminals: replacing parts
Coin path modules 6-51