Nortel Millennium M1000 Manual page 133

rprbk203 Page 27 Tuesday, February 16, 1999 9:12 AM
Figure 4-24: Removing the clamp plate
5. Lift out the clamp plate, with the VFD attached.
Refer to Figure 4-24.
For instructions for working with the large-screen
graphical display assembly, refer to Replacing the
graphical display assembly on page 4-7.
6. Use Figure 4-25 to locate the five M5 tapping screws
which secure the upper bezel assembly.
7. Remove four of the five screws. Use a #2 type 1A
cross-recess screwdriver.
Millennium Multi-pay-based terminals: replacing parts
Upper bezel components 4-27
Keypad PCP
VFD assembly
Clamp plate
Front housing