Nortel Millennium M1000 Manual page 132

rprbk203 Page 26 Tuesday, February 16, 1999 9:12 AM
4-26 Upper bezel components
Figure 4-22: Bezel B — keypad/alerter connect to hookswitch
Alerter PCP
Alerter or
smart card
alert connector
Ribbon
cable
connects
to telephony
PCP
Hookswitch
PCP
(with rain shield)
Mylar keypad
cable
Keypad PCP
Figure 4-23: Locating the ID bezel screws
NTP: 506-6501-203 Issue: 00.01 Status: Standard Date: June 1998
4. Remove the ID bezel.
a) With one hand, support the ID bezel on the outside
of the terminal.
b) With the other hand, remove the two screws from
inside the terminal. Refer to Figure 4-23.
c) Remove the ID bezel from the front of the terminal.
Clamp plate
M5 screws securing
clamp plate and
ID bezel
ID bezel
attaches to
exterior of
housing
Top of front housing