Table of Contents
Advertisement
rprbk203 Page 4 Tuesday, February 16, 1999 9:12 AM
1-4 Introduction
NTP: 506-6501-203 Issue: 00.01 Status: Standard Date: June 1998
Note: Large-screen terminals do not use a display
window assembly, this is part of the display assembly.
•
instruction card, provided by the operating company
Note: Large-screen terminals cannot use display win-
dow instruction cards.
•
* card reader assembly: mag card or multi-card with or
without datajack connector
Note: Coin basic terminal has a blank bezel
•
alerter PCP
•
number card, provided by the operating company
•
hookswitch PCP or external interface hookswitch PCP
with rain shield (goes with upgraded upper bezel
assembly)
•
* hookswitch/alerter bezel assembly
•
five- and ten-button quick access key sets or blank
bezel
•
* ID bezel and coin guide
•
coin validator
•
vault door
•
coin box rail
•
vault security PCP or e-lock security PCP and mount
•
coin compartment lock, mechanical or electronic
•
coin box and coin box cover
•
escrow
•
rear terminal PCP
Note: The Multi-application control PCP requires the
newest version of rear terminal PCP, which has extra
grounding and power regulation features
•
IAS (inferred answer supervision) module (optional)
•
smart card alert daughter board (optional) (through-
hole control PCP only)
* These assemblies should have gaskets included. Do
not install these components without a gasket. Ensure the
gasket is undamaged before replacing it in the set.
Advertisement
Table of Contents
