Nortel Millennium M1000 Manual page 112

rprbk203 Page 6 Tuesday, February 16, 1999 9:12 AM
4-6 Upper bezel components
Figure 4-5: Attaching the VFD to the clamp plate
VFD
PCP
Figure 4-6: Folding the VFD cable under the PCP assembly
NTP: 506-6501-203 Issue: 00.01 Status: Standard Date: June 1998
Clamp plate
VFD cable connects here
c) Maintain the bend in the cable so it sits under the
PCP assembly.
d) Connect the cable to the J20 connector on the
control PCP.
rubber grommet
(sits between PCP
and ESD shield at
each corner)
Screw secures
VFD to clamp
plate (one at
each corner)
ESD shield
PCP assembly
VFD
VFD cable
folded under
PCP
assembly
Open front
housing
(top)