Nortel Millennium M1000 Manual page 192

rprbk203 Page 10 Tuesday, February 16, 1999 9:12 AM
6-10 Coin path modules
Figure 6-9: Exploded view of the coin validator
Coin rejection
chute
NTP: 506-6501-203 Issue: 00.01 Status: Standard Date: June 1998
To troubleshoot a validator jam or to remove the inter-
nal partition that prevents such jams, the validator
comes apart, as shown in Figure 6-9.
Two steel hinge rods, one on either side of the valida-
tor, release the upper and lower runways.
Refer to Figure 6-8.
Upper runway
cover
Lower runway
cover
See this
Vandalism deterrent pins
Be careful when removing the upper
runway housing if the validator has
the three validator runway pins
located beneath the upper runway.
Refer to Figure 6-10.
Note: Shading indicates
depth; the white sensors
are the highest level
Validator
body