Nortel Millennium M1000 Manual page 209

rprbk203 Page 27 Tuesday, February 16, 1999 9:12 AM
Figure 6-24: Inserting the coin box into the coin vault
Coin box rail
Lid has a
one-way lever
Coin box handle
3. Insert the T-tool or L-tool into the slot on the front of the
vault door.
4. Turn the tool counterclockwise until it stops.
5. Use the tool as a handle to pull the vault door away
from the terminal.
6. The coin box is now exposed and can be removed by
pulling on its handle. Refer to Figure 6-24.
Note: When you remove the coin box, a notification is
sent to the Millennium Manager.
7. To replace the vault door or coin box, reverse the pre-
ceding steps.
Make sure you align the lid lever of the coin box with
the slot in the coin box rail.
See Figure 6-24.
Coin box
Millennium Multi-pay-based terminals: replacing parts
Coin path modules 6-27