Table of Contents
Advertisement
rprbk203 Page 55 Tuesday, February 16, 1999 9:12 AM
7. Attempt once again to move the coin return assembly.
This time it should sit solidly, without moving.
8. Ensure all cables and cords are tucked inside the ter-
minal housing.
9. Restore power to the terminal at the rear terminal
PCP.
10. Remove your ESD strap connection to the terminal.
11. Close and lock the terminal.
Refer to Restoring the terminal to operation on
page 2-10, if necessary.
12. Perform operation tests to ensure the terminal works
properly.
Millennium Multi-pay-based terminals: replacing parts
Coin path modules 6-55
Advertisement
Table of Contents
