rprbk203 Page 10 Tuesday, February 16, 1999 9:12 AM
3-10 PCP assembly components
Figure 3-5: Removing the PCP assembly bracket
Hold by
plastic
frame
Lift PCP module
straight up.
Hold by plastic
frame
NTP: 506-6501-203 Issue: 00.01 Status: Standard Date: June 1998
4. Refer to Removing the telephony or control PCPs
on page 3-11, if you need to replace either PCP.
If you are removing the PCP assembly in order to ac-
cess other components, put the PCP assembly in a
static-free bag until you need to re-install it.
5. Replace the PCP assembly by reversing the previous
steps.
6. Return the terminal to operation. Refer to Restoring
the terminal to operation on page 2-10, if neces-
sary.
7. Make sure you test the various functions to ensure
that the terminal is operational.
Wear grounded ESD
strap when working
with internal boards
PCP assembly
bracket
guides