Table of Contents
Advertisement
rprbk203 Page 9 Tuesday, February 16, 1999 9:12 AM
As you enter the digits, they appear on the VFD.
If you make a mistake, press the
the number.
3. Press
.
This message appears on the VFD:
Please use key now
& open the terminal
See this
If you do not open the terminal
within three minutes, the terminal
times out and the idle prompt,
Please lift receiver, reap-
pears on the VFD.
If you attempt to open the terminal
at this point, the terminal sends an
alarm to the Millennium Manager
that an illegal entry is occurring.
4. Turn the T-tool clockwise to unlock the housing.
DO NOT open the front housing.
5. Continue with the INSTALL, CDR upload, or mainte-
nance tests as you would with any other Millennium
terminal.
6. To end the procedure at any time, close the housing
and lock the terminal with the T-tool.
7. When you are ready to remove the portable display,
follow the procedure in Removing the Coin basic
portable display on page 7-10.
Millennium Multi-pay-based terminals: replacing parts
Coin basic w/o display 7-9
button and re-enter
Advertisement
Table of Contents
