Table of Contents
Advertisement
rprbk203 Page 46 Tuesday, February 16, 1999 9:12 AM
6-46 Coin path modules
Figure 6-37: Inserting the coin box into the coin vault
Coin box rail
Lid has a
one-way lever
NTP: 506-6501-203 Issue: 00.01 Status: Standard Date: June 1998
Lid slides into
coin box rail
Coin box
13. Close and lock the coin vault.
See this:
Once the vault is closed and locked,
you will not be able to get back in
without resetting the electronic key.
14. Restore the terminal to operation.
Refer to Restoring the terminal to operation on
page 2-10, if necessary.
a) Reconnect the power to the terminal by recon-
necting the terminal block to the rear terminal PCP.
b) Remove your ESD strap connection.
c) Close and lock the terminal.
d) If you manually removed the terminal from service
through the craft interface, re-enter the craft inter-
face and restore the terminal to service.
Advertisement
Table of Contents
