Nortel Millennium M1000 Manual page 119

rprbk203 Page 13 Tuesday, February 16, 1999 9:12 AM
WARNING Cable connections:
Ensure that the cable between
the VFD and the ADSI board is
correctly connected.
This means that the connectors
at either end of the cable
Reversing or
should be connected with the
crossing this
same orientation. For instance,
connection could
the #1 pin should connect to the
result in damage
same opening at both ends.
to the boards.
This orientation is shown in
Figure 4-12.
Figure 4-11: Display connection on ADSI board
Figure 4-12: Connecting graphical display cable
Colored dot indicates
#1 pin
ADSI/VFD
PCP connector
Colored
stripe on
cable
Millennium Multi-pay-based terminals: replacing parts
Upper bezel components 4-13
Display assembly
ADSI board connector
VFD
ribbon
cable
and
connector