Nortel Millennium M1000 Manual page 54

rprbk203 Page 26 Tuesday, February 16, 1999 9:12 AM
2-26 Accessing the terminal
Figure 2-16: Close-up of the swivel assembly
Note: the cotter pin
goes out in
this direction
NTP: 506-6501-203 Issue: 00.01 Status: Standard Date: June 1998
Lanyard end fitting
Swivel
bushing
7. Remove the swivel bushing from the swivel.
Refer to Figure 2-16.
8. Slide the end fitting of the lanyard cord out of its retain-
ing slot. Refer to Figure 2-16.
9. Slide the armored cord and handset leads out of the
retaining slot in the swivel housing.
Lanyard
retaining slot
Sheathing
from
handset
leads
inside
Armored
Cord
cord
retaining
slot
Swivel clamp/screw