Nortel Millennium M1000 Manual page 151

rprbk203 Page 9 Tuesday, February 16, 1999 9:12 AM
Figure 5-9: Positioning the card reader rain shield
Rain shield must
be rotated onto
back of card reader
Notch
Figure 5-10: Rain shield in place
Rain shield
wraps around
the card reader
Card reader attaches
to card bezel at this end
Tab on card reader
(underneath PCP extension)
c) Align the notch in the top edge of the rain shield
with the tab on the card reader PCP.
This tab extends from below the card reader PCP
in the middle of the back end of the card reader.
Refer to Figure 5-8 and Figure 5-9.
d) Rotate the top of the rain shield upwards.
— Move the rain shield towards the card
reader, until the notch in the rain shield
clicks onto the tab on the card reader.
— The rain shield should fit snugly against
the back end of the card reader.
Refer to Figure 5-10.
Card reader
Millennium Multi-pay-based terminals: replacing parts
Card and hookswitch parts 5-9
Card reader (top view)
Card reader bezel
attaches at this end