Table of Contents
Advertisement
rprbk203 Page 5 Tuesday, February 16, 1999 9:12 AM
Note: Do not open the terminal housing.
See this:
Coin basic w/o display
At this point you will have to open
the terminal to install the portable
display if you have not already
done so.
Ensure you follow the ESD
precautions outlined below
BEFORE YOU INSTALL THE
DISPLAY:
• Connect your ESD strap to an
ESD point inside the terminal.
• Disconnect the power from the
control PCP.
7. Upload the terminal status and call-detail records
(CDRs) with the following procedure:
a) Enter 732 from the keypad if the prompt is not
already displayed.
b) Press 1.
c) Press
.
d) If there were call records in the terminal, repeat
Steps 7b to 7c until this message appears on the
VFD:
No call records
To continue, press
e) Press
.
See this:
e-purse applications
Ensure the transaction records get
uploaded.
Refer to Millennium terminals: using
the craft interface for specific details.
Millennium Multi-pay-based terminals: replacing parts
Accessing the terminal 2-5
Advertisement
Table of Contents
