Nortel Millennium M1000 Manual page 6

Multi-pay-based terminal replacing part
Table of Contents

Advertisement

rprbk203 Page vi Tuesday, February 16, 1999 9:12 AM
vi
Revised terminology:
For a feature description of this terminal, refer to the Millennium
terminals product guide . For configuration information, refer to
Telco Maximizer documentation.
January 1997
This was the standard release for terminals based on firmware
release MTR 1.9. This guide reflects an upgrade of the
Millennium Manager platform to MSR 2.0.
NTP: 506-6501-203 Document issue: 00.01 Status: Standard Date: June 1998
lineswitch = hookswitch
external interface hookswitch : the hookswitch module
which is required for the new upper bezel assembly
coin box = cash box
multi-application control PCP : this control board is easily
visually distinguished by its ADSI and SAM daughter board
connectors and its square firmware and voiceware chip
sockets
smart card alert = SCA
display assembly : refers to the 22 X 10 display, the
buttons beside and below the display, and the casing
around the display which is used for large-screen terminals
in place of the 2-line display, clamp plate, and display
window on other Multi-pay-based terminals
Coin basic w/o display terminal : a terminal which has no
VFD or card reader and accepts only coins or manually-
entered calling cards as call payment
RJ11 plug = teladapt

Advertisement

Table of Contents
loading

Table of Contents