Nortel Millennium M1000 Manual page 155

rprbk203 Page 13 Tuesday, February 16, 1999 9:12 AM
Figure 5-13: Identifying a multi-application control PCP
Control
firmware
• Terminals with the multi-application control PCP can
have either or both features, which are turned off or on
through a software update. For these terminals, the
datajack telephony board is standard equipment.
See this: Coin basic terminals
Datajack calls cannot be made with
coins.
• Secondly, there are two types of datajack connectors.
— The Nortel-supplied datajack is an external
teladapt installed in the card reader bezel.
— The terminal may also have an external, Telco-
provided jack. In this case, refer to the documen-
tation supplied by the Telco for servicing the jack.
Millennium Multi-pay-based terminals: replacing parts
Card and hookswitch parts 5-13
Voice
Smart card alert
firmware
connectors