Nortel Millennium M1000 Manual page 148

rprbk203 Page 6 Tuesday, February 16, 1999 9:12 AM
5-6 Card and hookswitch parts
Figure 5-5: Card reader assembly, lower view
Card guide fits
over this edge
Figure 5-6: Card reader removal and replacement
Back of
card reader
NTP: 506-6501-203 Issue: 00.01 Status: Standard Date: June 1998
Card reader
6. Change whatever part of the assembly needs to be
changed:
a) Remove the four M3.5 screws which attach the
card reader to its bezel. Refer to Figure 5-6.
These two screws attach
the card reader to its bezel.
Two other screws are not
visible in this diagram.
Back of card
reader bezel
Four screw slots to attach
card reader to bezel
Card reader
bezel
Screw posts
for securing the
bezel to the
front housing
Front of the card
reader without the bezel
Card reader PCP
Card
slot