Remote Programming - Default And User Setups - Keithley 2750 User Manual

1-24 Getting Started
Table 1-4 (continued)
Default settings
Setting
Voltage (AC and DC)
dB
Reference
Digits (AC)
Digits (DC)
Filter
Window
Count
Type
Range
Rate (DC)
Rel
Note: With a Model 7700, 7706, or 7708 installed, the default sensor junction is Internal. Otherwise, the Simulated (23ºC) junction is
selected.
Remote programming — default and user setups
Default and user setup commands are listed in
NOTE
Table 1-5
Default setup commands
SYSTem:PRESet
*RST
*SAV <NRf>
*RCL <NRf>
SYSTem:POSetup <name>
Factory
Off
1.0
5H digits
6H digits
On
0.1%
10
Moving
Auto
Slow (5 PLC)
Off
The SYSTem:PRESet and *RST defaults are listed in the SCPI tables in
Section 15.
Commands
Model 2750 Multimeter/Switch System User's Manual
Off
1.0
5H digits
6H digits
Off
0.1%
10
Repeat
Auto
Slow (5 PLC)
Off
Table 1-5.
Description
Restore SYSTem:PRESet defaults.
Restore *RST defaults.
Save settings as user-setup; <NRf> = 0, 1 or 2.
Restore user-saved setup; <NRf> = 0, 1 or 2.
Specify power-on setup; <name> = RST, PRESet, SAV0,
SAV1, or SAV2.
*RST Set Diff